Race Drone
Today it's pretty easy for you to be able to assemble your own drone race. In addition to the time the assembly is relatively faster it turns out by assembling your own drone race-cost is incurred even cheaper than you buy a finished drone race. By just spending about 4.5 million, including the VR headset to lead the drone avoiding obstacles, you can already have your own drone races.Race Drone
Do not believe it? Consider the following explanation
BASIC
build
If you have never flown a drone before, you should practice with a cheaper drone. We recommend that you practice with a cheaper quadcopter. You must learn the basics of flying fast and so you no longer need to worry about expensive damage.Race Drone
You are also wondering with more experienced people, you can wonder in online forums, so you can talk to people who are knowledgeable about your project.
You can add more advanced stuff to your Drone Race like GPS and sonar sensors, or even frimware codes to add custom functionality.
START RESUME DRONE RACE
1) Collect All Supplies
solder
Prepare the tools that will help you in assembling your drone race like; a set of screwdrivers, a set of pliers, solder, and multimeter for connection testing.
Prepare also a large enough space as a place to assemble your drone. A room with enough space will help you start marking all the parts of the drone. This tagging process is important because it will help you organize everything and if any part of the missing drone you are not too confused to look for it.
During the assembly process, be patient. Do not be too hasty, enjoy every fun process when you assemble. Assembling a drone race is like playing a puzzle, mistakes may happen, but it would be great if everything worked out neatly.
2) Assembling
start
There will be many connections to the drones that need to be soldered. Be careful when doing this, especially for you who have never done it before.
Notice also when starting to install two pairs of machines, the direction of the engine must be turned counter clockwise so that the drone can fly. To test it, you can use Servo Tester.
Flight Controller board is the most important part of a drone. It can be said that this part is the operating brain that will translate all the inputs on remote control in flight. Be careful when soldering connectors on this board. Then, after everything is done in solder test by using multimeter.
3) Trial
clean-flight
After all parts are finished assembled next is to test the results of this drone assembly. The first test is by installing the battery. If at the time the battery is installed and when it is switched on, the drone out of smoke means there is an incorrect connection. Immediately remove the battery and check every available connector.Race Drone
After making sure when the battery installation does not smoke, connect your remote controller to the computer using a USB cable and open CleanFlight Chrome to start configuring your drone. Then, the receiver connection to your drone and firing transmitter. You can also add FPV to this process.
4) Time to Fly
ready-to-fly
Time to fly! If you have connected to FPV camera, you can directly enjoy every flight menuver that your drone do. But remember, you also need a friend who keeps you as the drone-directed tracker you are doing.
x
