TBS Vendetta II FPV Racer

The Ultimate FPV Racer - TBS VENDETTA II RTF / BNF Package

Full carbon fiber monocoque, short swap arms, solder-loose maintenance, geared up to fly as 240 length fpv racer, for five" props.

But it does not quit there! Sporting the brand new TBS Triumph Antenna in mixture via the TBS FPVision OSD and also TBS Unify Pro VTX, the TBS Vendetta allows you to configure every parameter of your FPV racer using R/C stick commands! Each drone comes tuned and also test-flown with the aid of our professional tuning professional, Magnus. Install a receiver, strap on a 4S battery and also the TBS VENDETTA II will tear a hole into the sky, and you are coming alongside for the journey.TBS Vendetta II FPV Racer

Version 2: LIGHTER, FASTER!

We have actually stored what turned into properly concerning the Vendetta: Durability, aesthetics, speed. And we have constructed upon it. The inner electronics have been completely re-organized. A new plastic tray turned into designed to match. Instead of a CORE PRO and also Unify Pro we have included the all-new TBS FPVision OSD.

The Colibri V2 FC is a rock stable performer collectively with the brand-new and improved 6S-capable BLHeli-S 25A Bulletproof ESC's. Despite all the enhancements, we've got managed to shed 30 grams and advanced the wiring, in addition to reinforced the frame in all the areas in which wear as well as tear may break it above time. A very subtle FPV Racer, some thing you don't see every day for positive in this fast-paced enterprise.

We construct it in favor of you!

We have actually it installed through the enterprise leading radio set - FrSky Taranis X9D Plus transmitter and FrSky XSR S.Bus receiver. Just turn on the transmitter and also join the plane battery and you could fly right the way.TBS Vendetta II FPV Racer

CARBON FIBER ALL THE WAY

All structural components on the TBS VENDETTA are produced from custom-made carbon fiber layup. The palms are crafted from flat 3.5mm thick carbon fiber plates, machined to particular requirements on a four-axis CNC gadget, completely chamfered to save you delamination.

The frame is a natural paintings of artwork, which starts offevolved its life as a hand molded tubular 2mm carbon fiber grasp. It is trimmed down by way of a four-axis CNC system to shop weight. Smooth and rounded edges in the CNC cuts are our manner of showing off. The matte surface is sand blasted, because attention to element calls for it.

TIGHT INTEGRATION, MODULAR DESIGN

The entire FPV racer is constructed across the concept of countless self-contained components working together hand in hand for a unified consumer enjoy. Starting from the TBS ZeroZero FPV digicam, to the TBS POWERCUBE and TBS CORE PRO, the whole thing is repairable without a soldering iron, and via only devices. This does now not save you you from configuring all tuning parameters through the built-in OSD, to changing VTx channels or energy tiers.

FROM BOX TO AIR: 5 MINUTES

The TBS VENDETTA comes pre-tuned, as well as the R/C Calibration Wizard takes you via the setup steps. Just strap in a R/C receiver, track your goggles to BOSCAM A CH1, and beginning putting in your controls (both R/C receiver, goggles and also FPV video receivers are sold one at a time). The hands arrive in indifferent kingdom to allow brief get right of entry to to the R/C receiver bay the first time.

BUILT TO GROW

From the structural pressure to the over-powered ESCs, the whole thing has been evolved with your progress as a pilot in thoughts. A step to 6S with larger automobiles to advantage ridiculous energy-to-weight ratios, custom hands in favor of higher effectiveness vehicles and props, or genuinely a specific motor setup to fit your tastes are without difficulty viable, thanks to the MT30 connectors and the quick swap hands. You may even convey exceptional pairs of arms via specific motor as well as props combos hooked up in favor of every event, as well as install what you fancy!