Mapping Using DJI Phantom 3 Pro
Mapping Using DJI Phantom 3 Pro - DJI Phantom 3 Pro is a drone copter made by DJI, this drone is made specifically for Photography and Videography with 4K resolosi cameras. But now, Pix4D has developed an application for mapping using Phantom DJI.Mapping Using DJI Phantom 3 Pro
Example of Phantom DJI Flying Results In Overlay to Spot Image
To do the mapping with the mapping model, then you are required to download Pix4D-made applications with the name of Pix4D Capture that you can get for free on both iOS and on Android, this application is made specifically for mapping using DJI. To Download the Application, you can click the download button below.
After the download, you should create an account first in Pix4D Capture, how to create an account in Pix4D Mapper is quite easy, you just click Create an Account, then follow the instructions to finish, there will be a confirmation email from Pix4D, please do komfirmasi first .Mapping Using DJI Phantom 3 Pro
IPHONE ANDROID
Taken this step - step of doing a flight using Drone DJI Phantom 3 Pro
1. Preparation
Make sure you have your Drone battery and remote control battery packed, this is important so that you can fly smoothly, besides if your battery is detected by Pix4D app is not enough, Pix4D will not allow your device to fly.
In addition to preparing the tool, you should also pay attention to the place that you will use to do the flight, because when doing your mission make sure to be in a safe place, both for yourself and for others.
Important: When doing a mission, it means you can not control your device, so your plane will landing in the place where your plane is up (Launcing), but in most cases, there is a possibility of gps error, so it is not always fitting, can miss 1 - 5 Meter , (Ever DJI Phantom I stuck at the end of the tree, while I can not do anything but pray :-D)
2. Calibration
When all the preparations have been done, then you have to do the calibration of the plane first, as for how the calibration is the same as doing calibration when we will fly regular, by tap it we need also DJI GO application, you can download the application in Link below.
To calibrate you must first turn on your device, then turn on your remote and installed on your smartphone. then open the DJI GO app on your gadget, go to Camera menu, then there will be an option to do calibration.
3. Designing Flight Missions
After the calibration that should be done next is to design flight missions. To be able to create a mission then you must first exit the DJI GO application and Go to Pix4D Capture Application.
Pix4DCapture View
In Pix4D Capture, Please Reset first, so that the Application recognizes our current location, so the home point will be determined according to the position we are.
For altitude we specify as needed ,, logically, the higher it will be the greater area covered, the lower the frame in one photo is smaller.Mapping Using DJI Phantom 3 Pro
After all the preparations and missions have been made, then you just follow the instructions given in your Pix4D Captuer application.
If it is, then just start it, for data processing result fly drone copter this I will convey at another time, for now I think it is quite clear, but if there is still want in tanyaka, please ask in comment field or can contact me on the contact page. thanks
