10 Basic Ways to Fix Drone That Can not Fly
10 Basic Ways to Fix Drone That Can not Fly - Drone is an unmanned aircraft controlled by wifi signal, which is a very vulnerable flying unit damaged by crashes and errors of the user itself. So in blowing the drones needed caution because the drone unit itself is a very sensitive flying tool to the hard impact.
10 Basic Ways to Fix Drone That Can not Fly10 Basic Ways to Fix Drone That Can not Fly
Damage to drones is generally due to average crashes, or crashing roughly, landed hard landing as it fell on land, and hit by walls and trees. In fact there are some cases of drone entry into the pond or ditch the front of the house. it is reasonable if you are a new beginner to fly drones.
Some Tips For Fixing Damaged Drones
All these cases you can actually solve yourself with some tips that we summarize for you. But the way we say is the basic way, so you can fix the drone that can not fly. The following tips from us specifically for you.
1 # Drone Not Want to Crash or Crash
When you fly a drone with no heart-day or out of your control, such as getting wind caused a drone crash or crashing. Then when you want to revive the drone and drone condition finally will not turn on at all.10 Basic Ways to Fix Drone That Can not Fly
10 Basic Ways to Fix Drone That Can not Fly
Check Back GDP Is There Any Kabe Despite
It usually is a power cable cut off that connects between the lipo battery to the power board on the PCB drone you have. Simply disassemble carefully the body on the drone, note the power cable that connects the lipo battery whether there is a break or not.
Almost all toy-to-medium grade drones have more or less the same power distribution, usually disconnected cables due to violent impacts can be repaired by re-soldering with lead and solder fluid to stick again.
2 # Drone Fly Sloped Upon Hitting the Wall or Tree
It is reasonable if you just learned to fly the drone, then drone that you fly into the wall. Of course, your drones can be damaged, ranging from fractures to the blades up to irregular flight like slanting to the right or left.
Usually the drone tilt is due to an incompatible gyroscope condition, but you can fix it by recalibrating the drone. But if the drone still fly sideways or flying irregularly, you can dismantle the drone body and check the condition of the PCB board whether there is a loose cable or loose bolts make PCB board board becomes loose.
10 Basic Ways to Fix Drone That Can not Fly
Make Sure There Is No Bolt Left And The Align On The Body
After checking the condition of PCB board board especially gyroscope chip, make sure that gyroscope chip is in flat place and not tilted. If it is tilted you can try to prop up with paper or any object to the PCB board position is flat, thus making the drone is not tilted again.
But if the drone is still flying on its side, the only way is to do triming on the drone unit when flying. And your own triming can be set on the remote control drone you have, if the drone tilted to the right then the left triming setting and vice versa. Perform until the drone unit is completely stable by pressing the trim button slowly.
3 # Drones Do not Want to Fly While Propeller Has Spun
If you are flying a drone in a sandy area, we recommend using a landing pad so that the sand on the ground surface where you fly the drone does not enter the drone motor. And this is what makes propeller propeller on the drone does not want to fly when it's spinning, it's like losing power.
10 Basic Ways to Fix Drone That Can not Fly
Clean With Brush And Spray WD
The only way to improve drones that do not want to fly when the propeller is spinning is to clean the motor from the sand by disassembling and spraying the dynamo cleaning fluid from the sand like WD and Dynamo cleaner liquid safe to use on drone motors.
Then do not forget to clean the gyrations on the dynamo player, if your drone there are gears and can be given a little Tamiya 4WD lubricant. And make sure to mount the propeller in accordance with the position of the motor so that when flown is not upside down or tilted.
4 # Drone Fly Over And Do not Fly
This condition usually is after removing the propeller on the drone unit, then mounting the propeller is not appropriate and wrong. This keeps your drone upside down when it's first flown. Make sure you install the propeller in the correct position.
10 Basic Ways to Fix Drone That Can not Fly
Check Board Position Is Not Available
However, if the position of the propeller is correct but the drone is still flying sideways, it is probably a gyroscope that needs to be re-reworked. Or there is one motor that is weak and beputar not as strong with other motor.
If when you check the problem is in the condition of one of the weak motor, then the only way to fix it is to replace the motor unit with a new spare part. Or try to repair by cleaning the motor with WD liquid.
5 # Drones Difficult to Control When Flying
The most terrifying thing for any pilot drone is, when flying a very unresponsive drone. Where it is very difficult to control, when you move the throttle to the left then the drone does not respond, even slow responds to move to the left.
10 Basic Ways to Fix Drone That Can not Fly
Check Back Is There a Leased Cable
This is caused by a problem in both the TX and RX transmitters on the drone unit or on the remote control drone itself. Try to replace a similar remot control by borrowing on a friend who has the same drone whether the problem is on remot drone.
Or can check the condition of the PCB drone board especially on the transmtter part of TX, is there a cable transmitter off or Aus. If it is off or Aus you can re-soldering with caution.
6 # When Drone Fly Battery Quickly Out
Very annoying when the battery has been in charge of the lipo drone turns when in a short while drone unit has run out of power. Even the danger, when it's flying drones high enough and suddenly the drone unit died due to run out of power on the battery lipo.
10 Basic Ways to Fix Drone That Can not Fly
Charge With Digital Charge For Balanced Electricity
This is definitely caused by the condition of lipo battery that has been damaged and not feasible to use. Because you should know that there is a usage life of the lipo battery unit itself, and the solution is just replace the broken lipo battery unit by buying a new one.
Do not ever try to fix a damaged lipo battery, because otherwise dangerous could potentially explode and burn. Better to buy a new lipo battery, than you endanger yourself and can damage your drones.
7 # Drone Do not Want to Live Upon Entry Water Or Pool
One of the most frightening flying locations for some pilot drones is flying in river, sea and lake areas where there is considerable water within and wide. Because the assumption is, if the drone falls in the water it will cause damage.
But do not be afraid, because if your drone really goes into the water but still in a floating condition means there is still hope to be able to fly back. For the first repair to be done if the drone enter the water is to drain the drone with a hair dryer.
Then unload the body on the drone and input into the rice sack, but pastika for rice into the drone body in order to drone completely drone. And let stand for 2 days, then you can try to turn on the drones as usual.10 Basic Ways to Fix Drone That Can not Fly
If you do not want to turn on, try to replace the lipo battery used, because lipo battery usually damaged when entering water and check back on the PCB power distribution whether there is a part that konselt or burned. If there is a burning cable, then you can replace the cable with re-solder.
8 # Drone Rough Though When in the Fly
There is a condition when you want to fly the drone there is a strange sound and increasingly becomes when you try to lift the power drone in order to fly. Most likely it is the presence of dirt on the motor or gear that rotates the propeller drone.
10 Basic Ways to Fix Drone That Can not Fly
Replacing Damaged Motor Parts
When it is cleaned, and there is also sound. Then certainly there is a motor gear broken on one motor in the drone unit. So it makes a pretty loud sound when you want to fly. The only way is to replace the gear with a new one.
9 # Remot Control On Drone No Want to Live
One of the causes of the remote control does not want to live, but the battery used is still new. Most likely there is a konslet on the PCB board in the power section. Try to take it to the place of electronic service to check with electric tester tool.
10 # Fixing Broken Drone Components
Damage to the drone unit is reasonable to occur such as broken on the body, landing skid, even other parts. Of course you really need a strong plastic glue in order to repair the drone unit in the broken part.
